GLOBAL PERSPECTIVE · INDEPENDENT THINKING
UNDERSTAND WHAT MOVES THE WORLD.
Money & Business · News analysis

October’s US CPI Is Missing Its Year-Ago Baseline

The US published a monthly CPI reading for October. A gap in the 2025 record shows what happens when an annual adjustment loses one of its inputs.

BY GABRIEL NICOLAEV – CYGURU · · 5 MIN READ
READING TOOLS
United States dollar bills and a calculator on a blue surface.
THE READING GUIDE

Inside this article

01October produced a monthly reading with a gap one year back ↓02The adjustment is a ratio between specified observations ↓03Three billing clocks can come apart ↓

Event / source date: 10 November 2026 — The US Bureau of Labor Statistics released October 2026 CPI data. · Published 12 NOVEMBER 2026

October produced a monthly reading with a gap one year back

The US Bureau of Labor Statistics reported on 10 November that its all-items Consumer Price Index for All Urban Consumers rose 0.4% in October on a seasonally adjusted basis, after rising 0.6% in September. Before seasonal adjustment the October index rose 0.2% from September and reached 337.511, where 1982–84 equals 100. Those monthly figures give readers a way to follow the most recent change in the basket.

The familiar 12-month all-items rate is missing from the October release. BLS explained that a lapse in federal appropriations prevented data collection in October 2025. Most series lack an index for that month, so the agency could not publish affected October 2026 12-month changes. September's 3.7% all-items change over 12 months, which the release shows in its detailed tables, belongs to September's comparison with September 2025. It can be reported accurately alongside the October release only with its own date.

The adjustment is a ratio between specified observations

An annual index calculation divides the new index level by the comparable level one year earlier, subtracts one and multiplies by 100. A monthly change divides by the preceding month instead. The same October observation can serve as the numerator in both calculations. It needs a different denominator each time. Seasonal adjustment is another choice that should match the series being used.

Suppose a hypothetical agreement starts with an annual payment of $100,000 and applies the percentage change in an unadjusted October index between years. With an index of 330 in the base period and 340 in the later period, the formula gives a rise of about 3.03%, or about $3,030. If the 330 observation is unavailable, a comparable September level of 328 would give about 3.66%, or about $3,659, if someone used it instead. These are invented figures for illustration. The difference of about $628 arises solely from changing the measurement window. A spreadsheet can produce both answers without showing whether a contract authorizes the second one.

Annualizing the latest monthly change addresses another question. Compounding 0.4% for 12 hypothetical months would describe a scenario in which the October pace repeats. It would supply no observed information about the missing base month. For economic reporting the distinction is worth a label. For a payment calculation it determines whether the formula has the inputs it was designed to use.

Three billing clocks can come apart

BLS guidance on CPI escalation calls for specifying the base payment, the precise index series, the reference period, the frequency of adjustment and the formula. It also explains why the agency considers seasonally adjusted series inappropriate for escalation. Seasonal factors are updated annually and adjusted observations can be revised for up to five years. The 0.4% figure in the October headline and the 0.2% unadjusted monthly figure serve different purposes even before an annual baseline is considered.

A contract can have an October reference period, a November release date and a January payment change. A release can arrive on schedule and still lack an index needed for that January change. The owner of the billing system needs a decision on how to handle the gap. The party paying the bill needs to know which figure was applied, if any, and whether the payment will be recalculated later. For a business with multiple agreements, both sides may need to check whether a rent escalation, a staff adjustment and an indexed supplier bill use the same series or months.

A rate increase reaches a business through its contract calendar. A missing data point reveals how that same calendar governs a different risk. An organization might pay an indexed cost on a date when its own customer prices are still fixed. A small discrepancy can persist for months if the two sets of contracts give different instructions for unavailable observations.

A fallback decides how to allocate a gap in the data

An agreement might provide for using an earlier pair of months, postponing a change until comparable data are available or applying an interim amount with a later true-up. Those hypothetical choices differ economically. Shifting the pair of months moves the measurement window. Postponing an increase preserves the prior cash flow in the interim. A true-up preserves a later adjustment but can leave either party with a receivable or a bill to settle. A rule that uses a three-month average also needs to specify what happens if one of the three values is unavailable.

The release points to separate BLS guidance for missing observations. The agency gives a method parties may use if all agree. They take the square root of the product of the published values immediately before and after the gap. In effect it assumes the same proportional movement from the first value to the midpoint as from the midpoint to the second. The guide describes both the resulting level and any change calculated from it as unofficial estimates. Interpolation can give parties a number with a reproducible method. Its quality depends on how well that smooth path approximates the missing month, especially when the observed series moves sharply.

For financial reporting on the October release, the most transparent account is to give the observed monthly movement, identify the series, and explain exactly why the all-items year-over-year comparison is unavailable. At the level of a lease or a supply contract, the next evidence is the text governing the reference period and any fallback. In both cases, leaving the gap visible is useful. It separates an observed change in prices from a decision about how to proceed when the benchmark cannot answer the intended question.

Gabriel Nicolaev — CyGuru

Sources & further reading

US Bureau of Labor Statistics October 2026 Consumer Price Index release ↗

US Bureau of Labor Statistics guide to CPI escalation ↗

US Bureau of Labor Statistics guidance on approximating missing index observations ↗

Illustrative photograph by Sasun Bughdaryan / Unsplash.

FOLLOW THE CONNECTION

Another angle on this subject

Continue through related ideas, decisions and consequences.